Replace faulty disk in linux md

Replacing a faulty drive in an mdadm managed RAID array.

Use 'mdadm –manage /dev/mdX -r /dev/sdF' to remove the drive that was marked as faulty from the array.
Power down and replace the drive with a good drive.
Power up and set the partition table on the new drive to match those of the other drives in the array. Here we used 'sfdisk -d /dev/sdN | sfdisk /dev/sdF'.
Add the proper partition on the new drive into the array, 'mdadm –manage /dev/mdX -a /dev/sdN2'
Sit back and wait for the recovery to happen. The system will be a bit slow but usable.

Ref:

~~LINKBACK~~

Discussion

Real name:

E-Mail:

Enter your comment. Wiki syntax is allowed:

Please fill all the letters into the box to prove you're human.

 __  __   _  __   ___    ___   __  __
 \ \/ /  | |/_/  / _ )  / _ ) / / / /
  \  /  _>  <   / _  | / _  |/ /_/ / 
  /_/  /_/|_|  /____/ /____/ \____/

Please keep this field empty:

Subscribe to comments